Friday, October 30, 2015

5 winter DIY steps for Keller homeowners




With the dead of winter fast approaching, it’s never too soon (or late) to prepare your Keller home for the cold months ahead. With the goal of keeping cold air out and warm air in, make sure you’re doing all you can to keep your family warm and your heating bills low.

Proper insulating and air sealing can help lower your energy bills by up to 30 percent. Additionally, the average U.S. home has a half mile of gaps and cracks spread throughout, according to energystar.gov. If you’re seeing spiders, dust, cobwebs and feeling drafts or uneven room temperatures, your home likely has gaps and poor insulation. Here are five DIY air sealing steps to help keep your home comfortable during the frigid weather using insulating foam sealant:

1. Scope out the problem areas
Start by checking around doors and windows that lead outside or to the garage. Gaps around water and waste pipes often lead to exterior walls which can let in a lot of air. Don’t forget to look around in your basement and attic where you may find gaping joists, holes in wood or cracked blocks.

2. Take safety precautions
Before starting any DIY project, be sure to take the necessary safety precautions. Begin by reading and understanding all of the instructions on the foam sealant can for proper use and handling. Sealant is sticky and will adhere to your skin, so cover all skin.  At a minimum, you’ll need both gloves and long sleeves to cover your hands and arms, along with a pair of safety glasses. Protect the floor and surrounding area by laying down a ground cover and make certain the room has proper ventilation with no sparks or flames nearby.

3. Start with windows and doors
To seal the openings around windows and doors and their rough openings, find an entry point for the nozzle to spray the foam sealant of your choice, such as Great Stuff Insulating Foam Sealant. Fill the cracks only about half way, because the foam will expand the rest of the way. Not only does this block out cold air, but it’ll help keep those unwanted bugs and spiders out of your home.

4. Move on to cracks in the foundation
Cracks in your home’s foundation tend to develop over time. It’s important to take action when you find them, to help prevent major damage down the road. Apply a water-resistant, air-tight sealant to any cracks you find in your basement or attic. Shake the sealant can and turn it upside down to begin filling. If you spray too much, wait for the sealant to cure, and after about eight hours when it is fully cured, level it with a serrated knife.

5. Seal off pipe penetrations
Pipes that penetrate floors and walls in your kitchen, bathroom and laundry room are prime areas for air flow and pests to sneak through. As a result, the space that surrounds the pipes should not be left wide open. Using a can of foam sealant, point the straw into the opening around the pipe and start sealing. Do not force foam into spaces or voids behind walls.

6. Safely store and dispose of cans
Most one-component insulating foam sealant cans are for one-time use so before you start, make sure you identify all the areas around your Keller home that you can seal. Also be sure to follow all of the instructions on the product label for both storage and disposal. Disposal regulations for these types of products vary. Because a sealant is pressurized it must be stored upright and at room temperature.


Whether it's selling your home or finding a new one, we have designed this site so that you can quickly and easily locate the information you are looking for. The Grove Team's client-centered approach results in the best possible outcome for you. Please contact us now to begin the process of achieving your dreams in home ownership.

No comments:

Post a Comment